SoftTree Technologies SoftTree Technologies
Technical Support Forums
RegisterSearchFAQMemberlistUsergroupsLog in
Windows MySQL Crashing Upon Install

 
Reply to topic    SoftTree Technologies Forum Index » DB Audit, DB Mail, DB Tools View previous topic
View next topic
Windows MySQL Crashing Upon Install
Author Message
healthscreen



Joined: 05 Nov 2008
Posts: 5
Country: Canada

Post Windows MySQL Crashing Upon Install Reply with quote
So when attempting to install DB Audit on a 32-bit Windows MySQL database mMySQLd crashes with the included trace.




081105 19:34:29 InnoDB: Started; log sequence number 0 53616308
081105 19:34:29 [Note] C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqld-nt: ready for connections.
Version: '5.0.67-community-nt-log' socket: '' port: 3306 MySQL Community Edition (GPL)
081105 19:36:07 - mysqld got exception 0xc0000005 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help diagnose
the problem, but since we have already crashed, something is definitely wrong
and this may fail.

key_buffer_size=8388608
read_buffer_size=65536
max_used_connections=2
max_connections=341
threads_connected=2
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 100944 K
bytes of memory
Hope that's ok; if not, decrease some variables in the equation.

thd=01C0B018
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
06609FB0 libmysql.dll!mysql_rpl_parse_enabled()
Trying to get some variables.
Some pointers may be invalid and cause the dump to abort...
thd->query at 01C130A0=DO db_audit_set_password('9b9da09e8a9b968b', 'a0b6be8a9b968bcdcfcfc7a0')
thd->thread_id=6
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.







I have included my my.ini as well

# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option
# "--defaults-file".
#
# To run run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]

port=3306

[mysql]

default-character-set=utf8


# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld]

# The TCP/IP Port the MySQL Server will listen on
port=3306


#Path to installation directory. All paths are usually resolved relative to this.
basedir="C:/Program Files/MySQL/MySQL Server 5.0/"

#Path to the database root
datadir="C:/Program Files/MySQL/MySQL Server 5.0/Data/"

# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=utf8

# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB

# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=341

# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=9M

# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=700

# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=16M


# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=17

#*** MyISAM Specific options

# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=8M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=8M

# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=208K


#*** INNODB Specific options ***
innodb_data_home_dir="C:/MySQL Datafiles/"

# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb

# Additional memory pool that is used by InnoDB to store metadata
# information. If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS. As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system. Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=44M

# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=10M

# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=8
#Enter a name for the binary log. Otherwise a default name will be used.
log-bin=
#Enter a name for the query log file. Otherwise a default name will be used.
log=

#Enter a name for the error log file. Otherwise a default name will be used.
log-error
#Enter a name for the slow query log. Otherwise a default name will be used.
log-slow-queries
#Enter a name for the update log file. Otherwise a default name will be used.
log-update


[audit]
sapw=a0b6be8a9b968bcdcfcfc7a0
said=9b9da09e8a9b968b
Wed Nov 05, 2008 8:41 pm View user's profile Send private message
healthscreen



Joined: 05 Nov 2008
Posts: 5
Country: Canada

Post Followup Reply with quote
My version of db_audit_mysql.dll is 1.0.0.28 (Product version 4, 1, 0, 22) with file date of 10/21/2008 .

Thank you.
Wed Nov 05, 2008 8:43 pm View user's profile Send private message
SysOp
Site Admin


Joined: 26 Nov 2006
Posts: 7841

Post Reply with quote
I'd like to suggest upgrading to DB Audit 4.2 and using the copy of the DLL that came with that version. You can download the trial version and install it on top of the existing installation.


In case that doesn't help, try the following: manually create user db_audit in MySQL server and set user's password to IAUDIT. Create new database db_audit and give that user full permissions for the db_audit database. Also give the user read/write permissions for mysql database and for information_schema database. Use DB Audit Management Console to configure and enable auditing on the server. Please make sure genera query log, binary log and error log are enabled.

Hope one off the above helps. If it doesn't please let us know.
Wed Nov 05, 2008 8:57 pm View user's profile Send private message
healthscreen



Joined: 05 Nov 2008
Posts: 5
Country: Canada

Post Reply with quote
The DB Audit Expert version is 4.2.23.12 ...

The MySQL DB_AUDIT users are configured on the server.

Both of those options are enabled.
Wed Nov 05, 2008 9:45 pm View user's profile Send private message
SysOp
Site Admin


Joined: 26 Nov 2006
Posts: 7841

Post Reply with quote
Do you still get the same error? or the error is different this time?
Wed Nov 05, 2008 9:50 pm View user's profile Send private message
Display posts from previous:    
Reply to topic    SoftTree Technologies Forum Index » DB Audit, DB Mail, DB Tools All times are GMT - 4 Hours
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

 

Powered by phpBB © 2001, 2005 phpBB Group
Design by Freestyle XL / Flowers Online.