SoftTree Technologies SoftTree Technologies
Technical Support Forums
RegisterSearchFAQMemberlistUsergroupsLog in
The Parameter is incorrect - Job has been disabled!

 
Reply to topic    SoftTree Technologies Forum Index » 24x7 Scheduler, Event Server, Automation Suite View previous topic
View next topic
The Parameter is incorrect - Job has been disabled!
Author Message
kerrygarrett



Joined: 18 Dec 2012
Posts: 2
Country: New Zealand

Post The Parameter is incorrect - Job has been disabled! Reply with quote
We have been experiencing the following errors in our 24 x 7 Scheduler for the past 3-4 months

(Following errors taken from Event Viewer on the server)

Error:
NomQty.I2.3.M: Error: 87 - The parameter is incorrect.

following soon after with

Warning:
NomQty.I2.3.M: Job has been disabled!

Now the obvious answer would be is the parameter correct?
These batch jobs run several times a day, every day of the week.

Mostly, they work perfectly but randomly we get these errors including the Job is disabled.

When checking the status of these jobs we find they have in fact run successfully and are not disabled.

Any thoughts as to how we can sort this out?

We are running:
24 x 7 Scheduler
Version 3.6.8
Tue Dec 18, 2012 8:38 pm View user's profile Send private message
SysOp
Site Admin


Joined: 26 Nov 2006
Posts: 7833

Post Reply with quote
Error 87 is the exit code of your batch file. the default error returned by operation system for that error code is "The parameter is incorrect"
Please analyze your batch file for what could be causing that particular error.

Please be aware that version 3.6.8 is no longer supported, it's very old and not compatible with the latest Windows releases. Please upgrade to the current version 5.0
Thu Dec 20, 2012 3:13 pm View user's profile Send private message
kerrygarrett



Joined: 18 Dec 2012
Posts: 2
Country: New Zealand

Post Reply with quote
These errors I list are not a normal occurance.

Only happen every now and then so my question is why? If there was a problem with the batch job configuration wouldn't you think it would be happening all of the time unless there was an issue with this version of 24 x 7?
Thu Dec 20, 2012 4:39 pm View user's profile Send private message
SysOp
Site Admin


Joined: 26 Nov 2006
Posts: 7833

Post Reply with quote
I think you are looking in a wrong place. The question about why your batch file returns exit code 87 should be addressed to the developer of that batch file. I have no way to know what the batch file is doing.

If you want us to take a look, please paste the code of your batch file
Fri Dec 21, 2012 12:51 pm View user's profile Send private message
mtpeden



Joined: 25 Jan 2015
Posts: 2
Country: United States

Post Error 87: - The parameter is incorrect Reply with quote
I know this is an old thread but I did not see a final resolution and I am facing the same problem.
I am using 24x7 ver 3.6.10
The job is running a database command which is an Oracle Stored Procedure
I can pull the SQL out and execute it successfully in Oracle without any failures.
There are no Exception errors defined as 87 in the Oracle stored procedure.
This seems to be an error code internal to 24x7 related to execution of SQL codes.
This job runs sometimes and other times it gives me this error. I cannot pinpoint what causes this situation to occur.
Any ideas or thoughts on next steps would be appreciated.
Sun Jan 25, 2015 12:06 pm View user's profile Send private message
mtpeden



Joined: 25 Jan 2015
Posts: 2
Country: United States

Post Error 87: - The parameter is incorrect Reply with quote
Found a resolution to this.
I had this job set as a detached process with a 2 min timeout.
I unchecked the detached process and ran the job again.
The job executed without issue.
I checked the detached process and ran the job again and got the Error 87 once again.

I have left the detached process unchecked at this point to resolve the issue.
Sun Jan 25, 2015 12:16 pm View user's profile Send private message
SysOp
Site Admin


Joined: 26 Nov 2006
Posts: 7833

Post Reply with quote
Thanks for posting the status and solution.

In the old version 3.6 that you are running, the detached option is for use with script type and database jobs (I mean SQL script jobs run by 24x7). the detached option when enabled option makes 24x7 run the job using a separate OS process to protect the scheduler process from job resource leaks and crashes. For regular processes such as as external executable files and batch files, the detached option is not needed and shouldn't be used.
Sun Jan 25, 2015 11:45 pm View user's profile Send private message
Display posts from previous:    
Reply to topic    SoftTree Technologies Forum Index » 24x7 Scheduler, Event Server, Automation Suite All times are GMT - 4 Hours
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

 

Powered by phpBB © 2001, 2005 phpBB Group
Design by Freestyle XL / Flowers Online.