1. Did you setup it to run as a "master" or "standalone"? 2. Do you have "Status display" and "tracing" options enabled? 3. What do you have in the Registry for "HKEY_LOCAL_MACHINE\SOFTWARE\SoftTree Technologies, Inc.\24x7 Scheduler\2.0\MultiProcessorSupport" key? : I have 2 servers, one test, one network. : The test server: -WinNT 4.x w SP5, 128M RAM, Intel 400 CPU. : -No issues before install. : -Settings for 24x7 are generic. : -Test SQL7 server. : The network server: -WinNT 4.x with SP5, 768M RAM, dual Intel 400 CPU's. : -No issues before install. : -Settings for 24x7 are generic. : -Network file/print server. : The test I run on the test server: -Run notepad for a minute, then terminate : it. : -Message box set to "0" or "10", both work. : The test I run on the network server: -Run notepad for a minute, then : terminate it. : -Message box set to "0" or "10", program freezes. : Use task manager to kill tasks. : Install accounts for both were full admins. : Aside from re-installing, are there WinNT : settings, memory issues or 24x7 config issues : that need to be addressed?
|